X534 Multi-Terrain™ Tractor

Durability -- Power -- Comfort
Performance -- Convenience

• Performance
• 5 U.S. gallon fuel tank with a large 3-inch fill opening located on the left fender makes adding fuel easy and helps eliminate spillage
• Twin Touch™ automatic transmission provides comfortable two-pedal foot control for effortless speed and direction changes
• Foot-operated traction assist locks rear wheels together for increased traction
• Hydraulic power steering is standard equipment to maximize the benefits of 4-wheel steering that provides maximum maneuverability and an uncut trim radius of only 13 inches (with 54-inch deck)
• 48- or 54-inch Edge™ Xtra Cutting System is designed to provide excellent performance in all conditions and operating modes including side discharge, mulching and material collection

• Power
• 25-hp V-Twin, liquid-cooled, John Deere iTorque™ Power System (a combination of engine features that provide more lugging ability, even cooling, and durability) provides excellent power and performance, easy starts and smooth operation

Base MSRP: $7,799.00 with 48-inch deck
$7,999.00 with 54-inch deck

• Durability
• Heavy-duty welded frame for the strength to operate a wide variety of equipment
• Built-in front and rear weight brackets, cast-iron front axle, and 3/4-in steering spindles provide a platform for more comfort, more versatility, and the durability to mow more acres
• Internal wet disk brakes for quick stops and long life

• Convenience
• Heavy-duty CargO Mount™ System (a combination of fender, deck and hitch mounting points) provides convenient and easy installation of rear attachments
• Standard tool tray and cupholder keep tools and beverages within reach Color-coded controls are conveniently located for easy access
• Color-coded controls are conveniently located for easy access
• Convenient dash-mounted fuel gauge indicates fuel level
• Standard hourmeter makes it easy to tell when oil changes and other maintenance should be performed
• Separate engine speed and choke controls make starting and warming up the engine easier in cold weather
• Mower deck height-of-cut control with rotary dial knob provides mower cut height range from 1 to 4 inches in 1/4-inch increments; on-board deck leveling gauge located in the center of the cut-height adjusting knob
• Hydraulic lift control for mower deck positioned on dash near steering wheel for quick, easy and precise fingertip control

• Comfort
• Comfortable, high-back sit-and-adjust seat features 7 inches of travel; springs adjust for operator weight allowing fine tuning of suspension; open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride
• Large 14-inch diameter steering wheel is comfortable to use and minimizes steering effort
• Full-length foot mats provide comfort for the operator while protecting the footrest area
• Roomy and uncluttered open platform makes getting on and off the tractor easy
• 5-position tilt steering wheel for increased operator comfort

Specifications for John Deere® X534 Multi-Terrain™ Tractor

ENGINE

Power

25 hp

Displacement

675 cc

Manufacturer

Kawasaki

Cylinders

V-twin, cast-iron liners

Type

OHV, oil filter

Battery

500 cold-crank amps

Choke/Speed Control

Separate levers

Cooling Method

Air

Fuel Tank Capacity

5 U.S. gallon

Fuel Guage

Yes

Transmission

Type

Automatic with differential lock

Control

Twin Touch pedals

Cruise Control

Lever on dash

Forward Speed, mph (km/h)

0-7 mph (0-11.3)

Reverse Speed

0-4 (0-6.4)

Chassis

Frame

Fully welded

Primer/Paint

E-coat/powder

Weight Bracket

Standard front and rear

Front Tires

16x6.5-8 turf

Rear Tires

23x9.5-12 turf

Front Axle

Cast iron

Hood Material

Xenoy

Hourmeter

Yes

Service Reminder

Yes

12 Volt Outlet

Yes

Service Interval Decal

Yes

Covered Toolbox

Yes

Tool Tray

Yes, under seat; also storage pocket on back of seat

Fender Handles

Yes

Cupholder

Yes

Steering

Type

Power, 4-wheel steer

Tilt Steering Wheel

Yes, 5-position

Turning Radius, in. (mm)

27 (686)

Uncut Circle Radius

14 in. (48X mower); 13 in. (54X mower)

Spindle Bushings

Metal, replaceable

Seat

Seat Back Height

16 in. open back design with handle

Fore-aft Adjustment

7 in. while seated

Seat Suspension

Coil springs, three-position adjustment for operator weight

Lift system

Type

Hydraulic

Mower Cut Height

1-4 in., 13 positions

Cut Height Increments

0.25 in.

Preset Cut Height

Yes

Mower

Type

Side discharge

Mower Deck Material

48X = .120 in. (3 mm); 54X = .134 in. (3.4 mm)

Mower Drive System

In-line belt

Mower Attachability

Front Draft Arms

Attached with spring pins at two points

Rear Draft Arms

Quick-pull pins

Belt Tension

Spring tension

Mower Wheels Rotate

Yes

Safety

Meets ANSI Standard

Yes

OPEI Label

Yes

Backup Protection

RIO

Safety Video

Yes

Buyer's Notes

Note 1

Heavy-duty garden tractor transaxle

Note 2

Convenient power steering and hydraulic lift

Note 3

Standard 4-wheel steering for exceptional maneuverability

U.S. Warranty

2 year

Optional Attachments

Mowers

48X, 54X

Rear Bagger

No

Powered Collection

7-, 14-, 19-bu. Power Flow

Mulching System

Yes

Front Thatcher

38, 46, 54 in.

Front Blade

48 in.

Snow Blower

47 in.

Rotary Tiller

No

Front Bumper

Standard equipment

Brush Guard

Yes

Bucket Holder

Yes, double

Weather Enclosure

Yes

Sleeve Hitch

Yes

Tow-Behind Tools

19